Our Air ducting (TX-SAC-N-GO) is available in five sizes, 8 inch, 12 inch, 16 inch and 24 inch diameters. The standard ducting is made of single-ply, PVC coated polyester fabric with a spring steel wire helix and external PVC wear strip. Electrically conductive ducting has carbon impregnated into the PVC coating and has a ground wire that runs the length of the duct. The ground wire will safely discharge any potential static buildup. The ducting has tested to UL 94 Standard and certified as fire retardant.

The ducting has its own storage bag attached to the cuff end. Simply attach the cuff end to the air movement device and pull the opposite end from the bag and place into position. When finished, the hose can easily be put back into the bag for storage and carrying. Our design allows multiple bags to be combined for long duct runs. No additional connectors are needed. The end of one hose can be inserted into the cuff end of another. All ducting can be placed on either end of an air mover or fan. The hose can be used for supply or suction.

The 8 inch ducting is designed to be used with the TX-3AM, TX-3AMS, TX-3AM-P AND THE TX-3AMS-P. It can also be used with the Prime Air 8 inch Tornado Blowers.

The 12 inch ducting is designed to be used with the TX-6AM, TX-6AM-P, or the TX-JF12. It can also be used with the Prime Air 12 inch Tornado Blowers.

The 16 inch ducting is designed to be used with the TX-8AM-P, TX-10AM, TX-10AM-P or the TX-JF16 Jet Can. It can also be used with the Prime Air 12 inch Tornado Blowers.

The 20 inch ducting is designed to be used wit the TX-JF20. The 24 inch ducting is designed to be used with the TX-JF24.