Six Way, Multi-user, Portable Dust Collection System to conform to OSHA Directive 1926.1153 for Crystalline Silica containment. This compressed air powered system can be used with compressed air powered or electric tools. It can be used with percussion tools, drills, saws, grinder and line is designed to work with one tool at time or six.. The unit requires approximately 245 CFRM of compressed air at 90 psi (pressure required for most air tools to operate properly) to create the suction (vacuum), needed to draw the dust away from the work being performed. This compressed air requirement is broken down as follows. Each line uses a TX-2AM Mini Air Mover to create the suction and each mini air mover requires 40 CFM at 90 psi. If all six lines are being used then a total of 240 CFM is required.
The TX-DCS-MU6 will allow up to 6 workers on one system. The unit comes with six 25 foot vacuum hoses, six 5 foot vacuum whips, 6 each T-2AM Mini Air Movers, 2 HEPA Filters, 2 each Cyclonic Filters, 6 each Vacuum Shrouds and 1 each tolling Cart. The 2 inch Vacuum Hose ccccan be adapted to any vacuum port on any tool. The adapters are sold separately.